Tel. : (480) 830 7764 | Fax : (480) 325 3571 | E-mail : transaircustomerservice@parker.com

Compressed air production

Compressed air as an industrial energy. Compressed air production and air treatment.

Show / Hide

Industrial Energy

Compressed air as the second source of industrial energy after electricity, requires a close understanding of the characteristics of compressed air to optimize its production and use.

Optimizing productivity while reducing operating costs is the common goal shared by nearly every manufacturing plant. Compressed air is considered the phantom utility, it cannot be bought, you must produce it. The initial capital cost of a compressed air system is minor compared to the operational cost. A Transair aluminium and stainless steel pipe system will significantly reduce your operational cost! Transair can help make your goals of reduced electrical costs a reality. 

The pie chart above illustrates the typical cost breakdown for an average compressed air system (compressor, pipe system and operating costs) over a 10-year period.

Show / Hide

Compressed Air Production

Compressed air can be produced by two processes:

• Dynamic compression (conversion of the air velocity into pressure): radial and axial compressors.
• Displacement compression (reduction of the air volume): reciprocating compressors (piston type) and rotary compressors (screw-, vane-, roots- or liquid ring compressors).
The compressed air production includes necessary elements of compressed air treatment.


Show / Hide

The air receiver

The air receiver enables:

• storage of compressed air in order to meet heavy demands in excess of the capacity of the compressor.
• balancing of pulsations from the compressor.
• cooling of the compressed air and collection of residual condensate.


Show / Hide

The air dryer

The air dryer reduces the water vapour content of compressed air. Moisture can cause equipment malfunction, product spoilage and corrosion.
Two methods are used: absorption and refrigeration.
Filters restrict the passage of oil and water particles conveyed by compressed air within the system.
Show / Hide

Condensate drains

Drains eliminate condensate (condensate water mixed with other impurities generated by compressed air and sources of pollution).
Show / Hide

The separator

The separator receives condensate from the drains. It separates oil and water avoiding any polluting discharge.